ST SwP Green Sonde/Transmitter for DigiTrak SE Locating System (12kHz)
$1100
Green ST SwP sonde for DigiTrak SE with switchable power. Operates at 12 kHz. In standard mode up to 15.24 meters, in high power mode up to 19 meters. Suitable for DigiTrak SE locators. The probe transmits 12 clock positions and inclination with 1% accuracy. Switches to standby mode after 15 minutes.
Switching to ST SwP high power mode - To switch the probe to high power mode:
1. Lift the operating probe upside down for 7 seconds,
2. Then lower it upside down for 7 seconds,
3. And lift it upside down again for 7 seconds.
After that, use the locator to monitor the increase in power (increase in signal level), then perform the standard calibration procedure.
When switching modes, wait up to 15 minutes without batteries — residual voltage can block the sensor and cause it to "freeze."
Operating time increased by 2 times - reduced current consumption while maintaining signal strength.
Increased reliability when working in heavy soils or in percussion drilling rigs - the sonde's structural elements responsible for trouble-free operation in harsh conditions have been reinforced.
1 year warranty. Free shipping.
Specifications
| Parameter | Value |
|---|---|
| Location | DigiTrak SE |
| Frequency | 12 kHz |
| Operating Depth | 15,24 or 19 m |
| Length × Diameter | 38,1 x 3,175 cm |
| Weight | 635 g |
| Warranty | 1 year |
| Max Temperature | 104° C |
| Inclination Accuracy | 1% |
| Condition | New, improved |